A technology partner for your design team
We join at design stage, work from your drawings and coordinate with everyone on the project, so the technology serves the architecture rather than competing with it.
Or call +34 696 191 430
Send us the plans while the design is still on paper. We review them free of charge and return clear notes on keypads, lighting circuits, speakers, screens, racks and cabling, before anything is built.
The earlier we see the drawings, the fewer compromises on site.
How we work with your studio
Free plan review at design stage
We mark up your drawings with positions for keypads, sensors, speakers, screens and equipment, and flag what needs space, power or ventilation.
Coordination with the design team
We work alongside the architect, interior designer, MEP engineer and builder, and keep our drawings in step with each revision.
Lighting designer collaboration
We turn the lighting design into circuits, dimming and scenes, and programme it so the result on site matches the intent.
Details that respect the interior
Keypad finishes, flush speakers, hidden screens and discreet equipment locations agreed with you, not decided on site.
Our own electricians
Wiring, distribution boards and racks are installed by our own team, so the infrastructure is built for the system from day one.
Clear handover
Documentation for the client. On KNX projects we hand over the full ETS project file, so the system is never tied to one installer.
From drawings to handover
One team, from the first markup to the final scene.
Plans received
Architectural, interior or electrical drawings, at whatever stage they are.
Review and notes
Free at design stage: positions, circuits, equipment space and cabling routes, with questions for the team.
Coordinated design
A technology design and proposal aligned with your drawings, finishes and budget.
Installation and programming
Our electricians install; our programmers configure every scene and interface in-house.
Handover
Tested on site, explained to the client and supported afterwards by the same team.
Working alongside lighting designers
A lighting scheme is only as good as its control. We take the designer's layers, circuits and moods and make them work: correct drivers and dimming, scenes that recreate the intended atmosphere, and keypads that are simple to use.
- Circuits and dimming defined with the designer
- Scenes programmed to the design intent
- Adjustments made on site, at night, with the designer
Brands we work with
We design, install and programme systems from these manufacturers, and choose them for each project, not by catalogue.
Control
Platinum Dealer
Audio & cinema
KNX & electrical
Advanced Partner
Control4 Platinum Dealer and KNX Advanced Partner. The other names are the manufacturers whose equipment we install and programme; logos belong to their owners.
Questions from architects and designers
At what stage should we involve you?
As early as possible: ideally while the plans are still being developed. That is when keypad positions, equipment space and cabling routes are easiest and least expensive to get right.
Is the plan review really free?
Yes. At design stage we review the plans free of charge and send our notes. A detailed proposal follows if the client wants to go ahead.
Which systems do you work with?
We are a KNX Advanced Partner and a Control4 Platinum Dealer, and we also programme and maintain Crestron, RTI and Savant systems.
Do you work with our own electrical contractor?
We can, and we coordinate closely when that is the arrangement. Where we install the electrical work ourselves, our own electricians handle wiring, boards and racks.
Send us your plans
Tell us about the project and its stage. Plans can also be emailed to morris@touchandcontrol.com.
Prefer to talk?
Loading the form…